| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-13.
Sideshift Cylinder (S/N 2000 and below). (Sheet 7 of 10)
CLEANING/INSPECTION
29.
Inspect rod (19) and inside of
cylinder shell (12) for
scratches,
grooves, burrs or other damage which
might cause a malfunction.
Small
burrs and shallow scratches can be
polished out with fine emery cloth
and oil.
Replace what cannot be
repaired. Threads on cylinder shell
(12) and rod (19) must not be
damaged.
Be sure residues of
abrasives and foreign
matter have
been cleaned away prior to assembly.
30.
Inspect bushing (23). Replace if it
is cracked or worn enough to allow
excessive movement of rod (19).
31.
Inspect all other parts.
Refer to
paragraph 2-9.
Go to sheet 8
12-117
|