| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-9.
Tilt Cylinder. (Sheet 2 of 10)
REMOVAL
1.
2.
3.
4.
5.
6.
Lower forks to the ground and shut
down engine.
Operate tilt control lever several
times
to relieve pressure in
cylinder.
WEIGHT HAZARD
Weight of cylinder assembly is
approximately 450 lbs.
Use
adequate hoist
and
sling
for
removal and installation.
Keep
area
clear of
unnecessary
personnel.
Failure to follow this
procedure could result in SEVERE
INJURY.
Attach hoist and sling to cylinder
assembly (20).
Using a 3/4” socket and socket wrench
handle, remove two bolts
(2) and bracket assembly
cylinder assembly (20).
Using a 5/16” socket and
key, remove two bolts (4
(1), washers
(3) from
head screw
and 5).
There might be some hydraulic
pressure still remaining in the
cylinder.
Use caution when
disconnecting tube assemblies.
NOTE
Tag all hose and tube assemblies
before disconnecting to aid in
installation.
Disconnect tube assembly (6).
Go to sheet 3
12-66
|
