| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-8. Fork Control Valve. (Sheet 9 of 9)
INSTALLATION (cont)
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
Using a 7/8” open end wrench, install
two new preformed packings (22) and
elbows (21).
Connect two hose assemblies (20).
Install new preformed
and elbow (18).
Connect hose assembly
Install new preformed
and elbow (15).
Connect hose assembly
Install new preformed
and connector (12).
Connect hose assembly
Install new preformed
and elbow (9).
Connect hose assembly
Install new preformed
connector (6).
Connect hose assembly
packing (19)
(17).
packing (16)
(14).
packing (13)
(11).
packing (10)
(8).
packing (7) and
(5).
Position wire assembly (4).
Using a 3/8” socket and socket wrench
handle, install washer (3) and bolt
(2).
Using
cable
front
Return
slip joint pliers,
connect
assembly (1) at connector in
of vehicle.
NOTE
M10A Forklift to original
equipment condition.
END OF TASK
12-64
|
