TM  10-3930-643-34 HYDRAULIC  SYSTEM  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 12-3. Loader Control Valve. (Sheet 6 of 14) ASSEMBLY 19. Install four new preformed packings (48). 20. Position  boom  valve  assembly  (47), tilt  valve  assembly  (46),  fork  valve assembly  (45),  inlet  valve  assembly (44) and outlet housing (43). 21. Using a 3/4” socket and torque wrench, install two rods (42), four nuts (41), rod (40) and two nuts (39)0 Tighten nuts (41) to 48 lb-ft and nuts (39) to 74 lb-ft. 22. Using a 1-1/2” socket and socket wrench handle,   install  new  preformed packing (38) and plug (37) in outlet housing (43). 23. Using  a  3/4”  socket,  socket  wrench handle and a open end wrench, install loader  control  valve  (36),  three washers (24), nuts (23), washers (22) and bolts (21). Go to sheet 7 12-18