| |
TM 10-3930-643-34
BODY, CHASSIS AND HULL ACCESSORY ITEMS.
11-1.
Heater Assembly (S/N 2001 and above). (Sheet 4 of 6)
CLEANING/INSPECTION
TOXIC/FLAMMABLE
Dry cleaning solvent P-D-680, used
for cleaning parts, is toxic and
flammable. Use only in well
ventilated areas. Wear protective
goggles and gloves. Do not smoke
or allow open flames or sparks in
areas where cleaning solvent is
used or stored.
Avoid contact
with eyes, skin or clothing.
If
contact with eyes is made,
flush
with cold water and seek
medical
attention immediately.
If contact
with skin or clothing is
made,
flush with cold water.
If you
become dizzy while using cleaning
solvent,
get
fresh
air
immediately.
16.
Wipe all parts except two hoses (17)
and connector (5) with clean
cloth
moistened
with
cleaning
solvent
P-D-680. Do not
apply
cleaning
solvent to wire lead on motor (26).
17.
Inspect all parts. Refer to para-
graph 2-9.
Go to sheet 5
11-5
|
