TM  10-3930-643-34 FRAME  AND  TOWING  ATTACHMENTS  MAINTENANCE.  (cont) 10-2. Frame Hinge Pin and Frame Assembly. (Sheet 11 of 13) INSTALLATION 57. Using  a  9/16"  socket,  socket  wrench handle and a open end wrench, install access  cover  (40),  six  washers  (39), nuts (38),   rollers (37) and bolts (36) to front frame assembly. 58. Install two washers (35), nuts (34), spacers (33) and bolts (32) to access cover (40). 59. Using a hammer and drift punch, install rod (31). 60. Using  a  3/4  socket,  socket  wrench handle and an open end wrench, install bolt (30), two washers (29), and nut (28) to rod (31) under rear front frame assembly. 61. Using a hoist and slings, connect two lift  cylinders  assemblies. Refer to paragraph  12-12. 62. Using 3/4" socket,   socket  wrench handle and an open end wrench, install two fittings (27), bolts (26) and nuts (25) to lift cylinders on each side of vehicle. Go to Sheet 12 10-16