| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING AND MAINTENANCE.
9-6.
Control Valve and Check Valve. (Sheet 3 of 15)
REMOVAL
8.
Using a 1/2" socket and socket wrench
handle, remove bolt’ (12) and strap
(13) from right front of engine
compartment.
9.
Using diagonal cutting pliers, cut
and discard tie strap (14) from under
right side of cab.
10.
Using a 9/16" open end wrench,
disconnect hose assembly (15)
from connector (16).
11.
Using a 3/4" open end wrench and
a scribe, remove connector (16) and
preformed packing (17). Discard
preformed packing (17).
12.
Using a 9/16" socket and socket
wrench handle, remove four bolts
(18) and two flange halves (19).
13.
Disconnect hose assembly (20).
140
Using a scribe, remove and discard
preformed packing (21).
15.
Using a 1" open end wrench,
disconnect hose assembly (22).
16.
Using a 1-1/4" open end wrench,
loosen locknut on elbow (23).
17.
Using a 1-1/8" open end wrench,
remove elbow (23) and preformed
packing (24).
Discard preformed
packing (24).
Go to sheet 4
9-39
|
