TM 10-3930-643-34 STEERING   TROUBLESHOOTING 9-5. Steering  Cylinder. ASSEMBLY NOTE AND  MAINTENANCE. (Sheet 4 of 5) All moving parts, seals and pre- formed  packings  must  be  lubricated with hydraulic fluid before installing. 15. Using  a  rubber  mallet,  install bushing (14) on cylinder (15). 16. Install cap (12) on rod (13). 17. Install new seal (10) in gland (11) with larger end of seal (10) facing inward. 18. Install new seal (9) in gland (11) with open end of seal (9) facing outward. 19. Install  new  preformed  packings  (8  and 7) and washer (6) on gland (11). 20. Lubricate rod (13). 21. Using a large rubber mallet, install items 11 thru 6 as an assembly on rod (13). Go to sheet 5 9-35