| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING
9-5.
Steering Cylinder.
DISASSEMBLY
AND MAINTENANCE.
(Sheet 2 of 5)
1.
Using a cylinder cap tool, unscrew
cap (13).
2.
Using a large rubber mallet, remove
items 1 thru 13 as an assembly from
cylinder (15).
3.
Using a 1-13/16" socket and socket
wrench handle, remove nut (1).
Hold rod (13) eye in suitable
holding device when removing nut (1).
4.
Remove 2 thru 5 as an assembly from
rod (13).
5.
Remove two rings (2) from piston (5).
6.
Using a scribe, remove and discard
seal (3) and preformed packing (4).
7.
Using a large rubber mallet, remove
items 6 thru 11 as an assembly.
8.
Using a scribe, remove washer (6)
from gland (11).
9.
Remove and discard preformed packings
(7 and 8).
10.
Remove and discard seals (9 and 10)
from gland (11).
11.
Remove cap (12) from rod (13).
12.
Using a hammer and punch, remove
bushing (14) from cylinder (15).
Go to sheet 3
9-33
|
