| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING AND
9-3.
Ground Driven Steering
DISASSEMBLY (cont)
8.
9*
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
MAINTENANCE. (cont)
Pump (S/N 2000 and below). (Sheet 3 of 10)
Using a scribe, remove and discard
preformed packing (12).
Using a small punch, remove two pins
(13), bearings (14) and body (15).
Using a small punch and flat blade
screwdriver,
remove two pins (16),
screws (17), plate (18) and body
(19).
Using a plastic mallet, remove two
gears (20) and pins (21) from shafts
(23 and 24).
Using retaining
two rings (22).
Using a plastic
(23 and 24).
Using a scribe,
ring pliers,
remove
mallet, remove shafts
remove
preformed
packing (25) and two bearings
(26).
Discard preformed packing (25).
Using a 9/16” socket and socket
wrench handle,
remove two nuts (27)
and washers (28).
Using slip joint pliers, remove two
studs (29) and block (30).
Using a scribe, remove and discard
two preformed packings (31).
Using a 1/4”
socket head screw key,
remove two bolts (32) and four bolts
(33).
Using a 1-1/4” open end wrench,
remove plug (34), preformed packing
(35) and plug (36).
Discard
preformed packing (35).
Using slip joint pliers, remove plug
(37).
Go to sheet 4
9-16
|
