| |
TM 10-3930-643-34
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-14.
Air Compressor. (Sheet 5 of 13)
DISASSEMBLY (cont)
24.
25.
26.
27.
28.
29.
30,
31.
32.
Using a 1/2” socket and socket
wrench handle, remove four lock bolts
(29) and bearing cap (33).
Remove and discard
seal (30).
preformed packing (31) and gasket
(32) from bearing cap (33).
Remove
all gasket material
from mounting
surfaces.
Remove four lock bolts (34), bearing
cap (35)
and gasket
(36) from
crankcase (41).
Discard gasket (36).
Using a small flat tip screwdriver,
remove and discard
seal (37) in
bearing cap (35).
Aline front connecting rod bearing
journal
of crankshaft (38) in
crankcase (41) with cut-out portion
of crankshaft (38) bearing bore in
front end of crankcase (41).
Using a soft faced hammer against
rear end of crankshaft (38),
drive
bearing (39) free from supporting
bore of crankshaft (38) in crankcase
(41)*
Remove crankshaft (38) from crankcase
(41).
Using a press, remove bearing (39)
from crankshaft (38).
Using a small flat tip screwdriver,
remove key (40).
(cont)
Go to sheet 6
8-66
|
