| |
TM 10-3930-643-34
BRAKE TROUBLESHOOTING AND MAINTENANCE. (cont)
8-8.
Pressure Converter Reservoir (S/N 2001 and above). (Sheet 6 of 6)
INSTALLATION (cont)
28.
29.
30•
31•
32.
33.
34.
35.
36.
37.
Position nuts (6 and 8) on tube (9).
Install ferrules (7 and 5) in nuts (8
and 6).
Ferrules (7 and 5) q ust fit
tightly in tube (9).
Connect items 9 thru 5 as an assembly
to connector (10). Tube
(9) must
point straight up.
Using 5/8” and 3/4” open end
wrenches, install connectors (4 and
3) and breather (2).
Using a 7/8" open end wrench, connect
tube assembly (1) to elbow (11) and
install on pressure converter.
Using a flat tip screwdriver, pry
retainer (17) off cover (15).
Remove cover (15).
Refill pressure converter to proper
level, refer to LO 10-3930-643-12.
Install and secure cover (15) with
retainer (17).
Bleed air from brake hydraulic
system, refer to TM
NOTE
Return M1OA Forklift
equipment condition.
10-3930-643-20.
to original
END OF TASK
8-36
|
