TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 7-6. Rear Drive Axle (S/N 2001 and above). (Sheet 3 of 7) REMOVAL (cont) 5. Using a 9/16” socket, socket wrench handle and a 9/16” open end wrench, remove nut (14), washer (15), bolt (16), washer (17) and clamp (18) from right side of rear axle assembly. 6. Using a 9/16” socket and socket wrench handle, remove two bolts (19), washers 7. Using a wrench, 8. Using a handle, (20) and access cover (21). 7/16” box and open end remove tube assemblies (22). 3/4” socket and socket wrench remove bolt (23), washer (24) and clamp (25). Use  transmission  and  differential lift for removal and installation. Keep area clear of unnecessary personnel. Failure to follow this procedure could result in SEVERE INJURY . 9. Position transmission and differ- ential lift under rear of vehicle to remove rear axle, items 30 thru 37 as an assembly. Go to sheet 4 7-34