TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE. 7-4. Front  Differential  Carrier  Assembly. INSTALLATION (Sheet 4 of 4) 10. 11. Apply Loctite 262 to mounting flange in differential (8) in rear, center, front axle. Position and secure differential  (8)  on  transmission  and differential lift and install into front axle assembly. Using a 5/8” socket, socket wrench handle and torque wrench, install bracket (7), 14 washers (6) and bolts (5). Tighten bolts (5) to 75  to 85 lb-ft. Using a 9/16”   socket,  socket wrench handle and a 9/16” open end wrench, install block (4), bolt (3), washer (2) and nut (1). NOTE Return  M10A  Forklift equipment  condition. to original END OF TASK 7-23