TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE. 7-4. Front  Differential  Carrier  Assembly. REMOVAL Use  transmission  and  differential lift for removal and installation. Keep area clear of unnecessary personnel. Failure to follow this procedure could result in SEVERE INJURY . NOTE The procedures for the left and right side axles are identical. 1. Support and secure differential (8) in  rear,   center,  front axle with transmission  and  differential  lift. 2. Using 9/16” socket, socket wrench handle and a 9/16” open end wrench, remove nut (1), washer (2), bolt (3) and block (4) and move brake lines to one side. 3. Using a 3/4”   socket and socket wrench handle, remove 14 bolts (5), washers (6), bracket (7) and differential (8). 4. Using  transmission  and  differential lift, remove differential (8) from front axle assembly. 5. Remove differential (8) from trans^- mission  and  differential lift and support between two wood blocks. (Sheet 2 of 4) Go to sheet 3 7-21