TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE. 7-3. Front Axle Assembly (S/N 2000 and below and S/N 2904 and above). (Sheet 5 of 9) REMOVAL 16. Using a 1-1/8”   socket,  socket  wrench handle and 1-1/8” open end wrench, remove 16 nuts (33), washers (34), bolts (35), washers (36), spindle (37) and preformed packing (38) from bowl (47) on left side. Discard preformed  packing  (38). 17. 18. Using a 1-1/4” socket and socket wrench handle, remove plug (39) and preformed packing (40) from spindle (37). Discard  preformed  packing (40). Remove plug (41), preformed packing (42), plug (43), preformed Packing (44), plug (45) and preformed packing (46) from bowl (47). Discard preformed packings (42,44 and 46). Go to sheet 6 7-15