TM  10-3930-643-34 FRONT AND REAR AXLES TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 7-2. Front Axle Assembly (S/N 2001 to 2903). (Sheet 2 of 6) REMOVAL 1. 2. 3. 4. 5. NOTE Vehicle must be raised off the ground and supported with jack stands under the frame for the following  procedure. Using a 9/16" socket and socket wrench  handle,  disconnect  propeller shaft (1) from under front of vehicle,  refer  to  TM  10-3930-643-20. NOTE Tag all hose and tube assemblies before disconnecting to aid in installation. Using a 1/2" box and open end wrench, disconnect  tube  assembly  (2). Using a 7/16"   socket,  socket wrench handle and a 7/16" open end wrench, remove nut (3),   washer (4), bolt (5) and washer (6). Using a 9/16"   socket,  socket wench handle and a 9/16" open end wrench, remove nut (7), washer (8), bolt (9), washer (10) and clamp (11) from right side of axle assembly. Using a 9/16" socket and socket wrench handle, remove two bolts (12), washers (13) and access cover (14). Go to sheet 3 7-6