| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING
6-6.
Transmission Assembly.
INSTALLATION (cont)
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
Install bracket (50).
Using a 3/4" socket and
AND MAINTENANCE. (cont)
(Sheet 9 of 12)
socket wrench
handle, install two
washers (49),
bolts (48), washers (47) and bolts
(46).
Connect clevis (45) to control and
scheduling valve
on transmission
(53).
Using long round nose pliers, install
pin (44) and new cotter pin (43).
Slide grommet (45c) back toward
bracket (50) and using a 9/16”
socket and socket wrench handle,
install four bolts (45b) and nuts
(45a) .
Connect clevis (42).
Using long round nose pliers,
install pin (41) and new cotter
pin (40).
Using a 13/16" open
install new preformed
and union (38).
Using a 7/8" open end
hose assembly (37).
end
wrench,
packing (39)
wrench, connect
Using a 1-1/2" open end off set
wrench, install new preformed
packing (36) and union (35) in
rear of transmission (53).
Connect hose assembly (34a).
Using a 7/16" open end wrench,
connect hose assembly (34).
Go to sheet 10
6-44
|
