TM  10-3930-643-34 ELECTRICAL  SYSTEM  MAINTENANCE.  (cont) 5-4 l Intermediate Wiring Harness (S/N 2001 and above). (Sheet 2 of 4) REMOVAL NOTE   For the following procedures, disconnect  is  used  to  indicate the separation of plugs, connectors  or  terminals  and  the removal of all attaching hardware. To prevent loss, reinstall  attaching  hardware  in its  original  position.   All electrical connections, except those on the instrument panel are sealed against moisture  with  silicone  sealant. Remove  all  silicone  sealant before  performing  maintenance  on electrical  connections.   All wire must be tagged when removed  from  connector. Indicate whether wire is connected  to  pin-type  or socket-type  connector.   Quantity of tie straps used to secure harness is variable. 1. Cut and discard tie straps (l). 2. Disconnect  lead  assembly  (11)  from pressure  converter  under  right  side of cab. Go to sheet 3 5-42