| |
TM 10-3930-643-34
ELECTRICAL SYSTEM
5-3.
Main Wiring
MAINTENANCE. (cont)
Harness. (Sheet 9 of 15)
REMOVAL (cont)
30•
Pull back boot (53).
31.
Using a 3/4” open end wrench,
disconnect three wire assemblies (54)
at terminals from starter solenoid.
32.
Pull back boot (55).
33.
Using a 3/8” open end wrench,
disconnect wire assembly (56) at
terminal from top
of fuel level
sending unit.
34.
Pull back boot (57).
35.
Using a
flat tip
screwdriver,
disconnect wire assembly (58) at
terminal from fuel solenoid.
36.
Remove harness (59) from vehicle.
NOTE
Refer to paragraph 2-13 for
electrical repair procedures
for
terminals and connectors.
Go to sheet 10
5-34
|
