| |
TM 10-3930-643-34
ELECTRICAL SYSTEM
5-3.
Main Wiring
REMOVAL
MAINTENANCE.
Harness. (Sheet 6 of 15)
19.
Using a 3/8” open end wrench,
disconnect two wire assemblies
(31)
at terminal from
torque
converter
temperature sender in rear, left side
of engine.
20.
Using a 9/16” socket and socket
wrench handle, remove
bolt (32),
washer (33) and clamp (34) from rear,
left side of engine compartment at
torque converter.
Go to sheet 7
5-31
|
