| |
ENGINE, FUEL, EXHAUST AND
4-17.
Radiator Assembly.
REMOVAL
10
Attach two 3/8-16
TM 10-3930-643-34
COOLING TROUBLESHOOTING AND MAINTENANCE.
(Sheet 2 of 2)
eyebolts in
support-to-radiator mounting holes in
rear of vehicle.
Weight of radiator assembly is
approximately 216 lbs.
Use
adequate hoist and lifting
strap
for removal and installation.
Keep area clear of unnecessary
personnel.
Failure to follow this
procedure could result in SEVERE
INJURY .
2.
Attach hoist and lifting strap to
eyebolts.
3.
Using a 3/4” socket and socket wrench
handle, remove two bolts and washers.
4.
Using hoist and lifting strap, remove
radiator assembly.
Place securely on
wood blocks on floor.
INSTALLATION
5.
Using hoist
and lifting strap,
install radiator assembly.
6.
Using a 3/4” socket and socket wrench
handle,
install
two
washers
and
bolts.
7.
Remove hoist and lifting strap.
8.
Remove two 3/8-16 eyebolts from
mounting holes.
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
4-111
|
