| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
4-9.
Oil Cooler. (Sheet 5 of 5)
INSTALLATION
13.
14.
15.
16.
17.
18.
19.
Using a 9/16” socket and socket
wrench handle, remove four nuts (11),
washers (4) and bolts (2).
Remove two pressure plates and seals
(6).
Discard seals (6).
Install plugs (10 and 9) in oil
cooler (5).
Install four new preformed packings
(8) and two connectors (7) in left
side of engine.
Position and install two new seals
(6).
Install oil cooler (5), four washers
(4), lock washers (3) and bolts (2).
Using a flat tip screwdriver, install
hose assembly (1) and tighten four
clamps (12).
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
4-72
|
