| |
BODY, CAB, HOOD AND HULL MAINTENANCE.
12-2.
Cab Sound Suppression. (Sheet 6 of 6)
INSTALLATION
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
Using a 5/16” open end wrench,
i n s t a l l w i p er
control mounting
bracket (26), two washers (25) and
screws (24).
Using a
wrench,
(22) on
bracket
I n s t a ll
using a
tighten
Using a
i n s t a ll
support
3/4” open and box end
install washer (23) and nut
wiper
c o n t r ol
mounting
(26).
wiper switch knob (21) and
socket head screw key,
screw (20).
5 / 1 6 ” o p e n e n d w r e n c h,
two new pads (19), front
(18), two washers (17) and
screws (16).
Install two pads (19)
with adhesive backing toward support
(18).
Install support (15), two washers
(14) and screws (13) on lower right
front of cab.
Install support (12), washer
(11)
and screw (10) on right
f r o n t of
cab.
Install support (9), two washers (8)
and screw (7) on lower left
f r o nt
of cab.
Install support (6), washer (5) and
screw (4) on left front of cab.
Using adhesive, install new strips
(3 and 2) on left and right corners
of cab, just beneath front window.
Using adhesive, install two new pads
(1) beneath seat support.
NOTE
Return M10A Forklift to original
equipment condition.
TM 10-3930-643-20
END OF TASK
12-13
|
