| |
TM 10-3930-643-20
FRAME AND TOWING ATTACHMENTS TROUBLESHOOTING AND MAINTENANCE. (cont)
11-2.
Roll Over Protective Structure. (S/N 2000 and below) (Sheet 4 of 9)
DISASSEMBLY (cont)
13.
14.
15.
16.
17.
18.
NOTE
The following step covers removal
o f i t e m s f r o m t h e r e a r l e ft
window. Removal of these items
from the rear right window is
i d e n t i c a l .
Using a putty knife, remove seal
( 2 6 ) f r o m i n n e r l i p o f p r o t e c t or
(27) from left rear window of ROPS
( 1 8 ).
Locate break in seal and pry tab “A”
free of tab “B” in seal (28).
Remove protector (27) from seal
(28) .
Remove seal (28) from window frame.
Remove seal (29) from protector
(30) from rear center window of
ROPS (18).
Locate break in seal (31) and pry
tab “A” free of tab “B”.
19.
Remove protector (30) from seal
(31).
20.
Remove seal (31) from window frame.
21.
Using a 7/16” socket, socket wrench
handle and a 7/16” open end wrench,
remove six nuts (32) from upper
left and right sides of inside,
rear of ROPS (18).
G O to sheet 5
11-6
|
