| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-18.
Air Compressor Piping. (Sheet 2 of 4)
REMOVAL
Make sure that vehicle will not
r o l l o r s h i f t.
Secure with wood
blocks.
DEATH
or serious injury may result by
y o u r f a i l u r e t o f o l l o w t h is
procedure.
1.
Remove engine side access cover (1)
f r o m r i g h t s i d e o f e n g i n e
compartment, refer
to paragraph
12-4.
NOTE
Tag all hose and tube assemblies
before disconnecting to aid in
i n s t a l l a t i o n.
2.
Using a 7/8” open end wrench,
disconnect hose assembly (7) in
right side of engine.
3.
Using an 11/16” open end wrench,
remove elbows (2 and 3).
4.
U s i n g a 1 / 2 ” s o c k e t a n d s o c k e t
wrench handle, remove bolt (4)
washer (5) and clip (6).
5.
Using a 7/8” open end wrench, remove
hose assembly (7).
6.
Using a 13/16” open end wrench,
11/16” socket and socket wrench
handle, remove tee (8) and plug (9).
7.
Using a 7/8” open end wrench,
disconnect hose assembly (19) at
elbow (10).
8.
Using a 5/8” open end wrench, remove
elbow (10).
Go to sheet 3
8-113
|
