| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-12.
Parking Brake Control Valve. (Sheet 4 of 4)
INSTALLATION
7.
8.
9.
10.
11.
Apply Loctite 592 and using 3/4” and
9/16” open end wrenches, install
elbows (15 and 14), adapter (13),
reducer (12) and switch (11) in
parking brake control valve (10).
Using a 1-1/4” open end wrench,
small ball peen hammer and small pin
punch, install parking brake control
v a l v e ( 1 0 ) , l o c k n u t ( 9 ) , k n o b ( 8)
and pin (7)
in
left
side
of
instrument panel housing.
Apply Loctite 592 and using a 1/2”
open end
wrench,
connect
tube
assemblies (6, 5 and 4).
Using a 1/2” open end wrench,
connect
wire
a s s e m b l y ( 3 ) at
terminal.
U s i n g a c r o s s t i p s c r e w d r i v e r,
install access cover (2) and screws
( 1 ) .
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
8-61
|
