| |
TM 10-3930-643-20
ENGINE , FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE.
4-30.
Radiatar Piping and Mounting. (Sheet 3 of 6)
REMOVAL
11.
Using 2 9/16” open and box end wrench,
remove three bolts (12) and washers
(13).
12.
Remove elbow (14).
13.
14.
15.
16.
17.
18.
Remove and discard gasket (15).
Remove all gasket material from
mounting surfaces.
using a flat tip screwdriver, remove
champs (16 and 17).
Remove hose (18).
Remove clamp (19).
Remove tube (20).
Remove clamp (21).
19. Remove hose (22).
20 .
using side cutting pliers, cut and
discard tie strap (23).
21.
Using a flat tip screwdriver, remove
clamps (24 and 25).
22. Remove hose (26).
23. Remove clamp (27).
24..
Remove tube (28).
25.
Remove
clamp
(29).
26. Remove hose (30).
27. Using side cutting pliers, cut and
discard tie straps (31, 32 and 33).
28.
Using a flat tip screwdriver, remove
clamp (34).
29.
Remove hose (35).
Go to sheet 4
4-129
|
