TM   10-3930-643-20 ENGINE,  FUEL,  EXHAUST  AND  COOLING  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 4-17. Air  Cleaner  Assembly  and  Mounting.  (Sheet  3  of  4) REMOVAL 6 . Using   a   9/16”   socket wrench   handle,   remove and   washers   (11). 7. Using  a  9/16”  socket wrench   handle,   remove a n d    s o c k et two   bolts   (10) and socket t w o    b o l ts (12),   washers   (13)   and   body   (14). 8. Using   a   9/16”   socket,   socket   wrench handle   and   box   wrench,   remove   three nuts   (15),   spacers   (16),   bolts   (17), washers  (18),  spacers  (19  and 20) and   bracket   (21). CLEANING/INSPECTION TOXIC/FLAMMABLE Dry   cleaning   solvent   P-D-680,   used f o r    c l e a n i n g    p a r t s ,    i s    t o x i c    a nd flammable.   Use only i n    w e l l ventilated   areas.   Wear   protective goggles  and  gloves.  Do  not  smoke or   allow   open   flames   or   sparks   in areas   where   cleaning   solvent   is used   or   stored.   Avoid   contact   with e y e s ,    s k i n ,    or c l o t h i n g .    If contact   with   eyes   is   made, f l u sh with   cold   water   and   seek medical attention   immediately.   If   contact with   skin   or   clothing   is made, flush   with   cold   water. If  y o u become   dizzy   while   using   cleaning s o l v e n t, get f r e sh a ir immediately. 9. C l e a n    a l l    p a r t s    w i t h    c l e a n i ng solvent   P-D-680. Dry thoroughly. Refer   to   paragraph   2-8. 10. I n s p e c t    a l l    p a r t s. R e f e r    t o paragraph   2-9. Go  to  sheet  4 4-70

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business