| |
TM 10-3930-643-20
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE.
4-9.
Oil Drain Line and Fittings. (Sheet 4 of 4)
INSTALLATION
9.
10.
11.
12.
13.
Using a 9/16” socket, socket wrench
handle and 9/16” box wrench, install
adapter (10), two washers (9), bolts
(8), new washers (7) and nuts (6).
Apply Loctite 592 to taper threads
of elbow (5) and using a 1-1/6” open
end wrench,
i n s t a l l e l b o w ( 5 ) t o
position shown.
Using a medium flat tip screwdriver,
install hose (4) and clamps (3 and
2 ) .
Fill with engine oil.
Refer to LO
10-3930-643-12.
Check for leaks.
Install engine side access cover (1)
on right side of engine compartment,
refer to paragraph 12-4.
NOTE
Return M1OA Forklift to original
equipment condition.
END OF TASK
4-31
|
