TM  10-3930-638-24&P 4 - 4 .    T R A N S M I S S I O N    M A I N T E N A N C E    ( c o n t) h. Third Clutch AssembIy (cont). STEP LOCATION ITEM ACTION REMARKS REASSEMBLY  (cont) d. Retaining ring (10) Position e. Spring retainer (9) Compress Use sleeve installed in press f. Retaining ring (10) Install Install retaining ring through opening in sleeve;  remove  sleeve g.  Outer  clutch  disc  (8)  Install Install one only, coated lightly with OE10 (refer to current lubrication order) h. Inner clutch disc (7) Install Install one only, coated lightly with OE10 (refer to current lubrication order) i. Outer clutch discs (8), Install Coat remaining discs lightly with inner clutch discs (7) OE10 (refer to current lubrication order). Alternate outer and inner disc until all are installed. The last disc installed is inner clutch disc j. Clutch disc backing Install plate  (6) k. Retaining ring (5) Install l. Third clutch shaft drum Invert and plug assembly (15) m Third clutch shaft Install front bearing (4) n. Third clutch shaft front Install bearing  locating  ring  (3) o. Retaining ring (2) Install p. Two third clutch shaft Install piston rings (1) Use sleeve and mallet to install Change   1   4-221