| |
TM 10-3930-638-24&P
4-4. TRANSMISSION MAINTENANCE (cont)
b. Converter Housing (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
(cont)
23
24
b. SIX screws (13) and
Install
lock washers (14)
Tighten to 23-25 pounds foot torque
NOTE
In the following step, slot in bearing must be downward (oppo-
site splined end of shaft).
Turbine
a. Bearing (12)
Install
Press using suitable size sleeve
shaft hub
b. Locating washer (11)
Install
assembly
c. Retaining ring (10)
Install
d. Piston ring (9)
Install
Converter
Turbine shaft hub
Position
While spreading ears on retaining ring (7)
housing,
assembly (8)
tap turbine shaft (8) into position. Be
rear
sure retaining ring (7) is fully engaged
in slot of bearing (12)
4 - 1 6 0
|
