| |
TM 10-3930-638-24&P
3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE (cont)
d. Rear Axle Differential Carrier Assembly.
This task covers:
a. Removal
c. Axle housing inspection
b. Axle housing cleaning
d. Installation
INITIAL SETUP
TOOLS
No. 1 Common Organiza-
tional Maintenance Tool Kit
Roller Jack, 1/4 ton capacity
Jack Stands, 4 ton capacity
Container, 4 gallon capacity
Hard Wooden Blocks (2),
6 by 6 by 18 inches
NSN 4910-00-754-0654
MATERIALS/PARTS
Cleaning solvent P-D-680
Clean cloths
Sealer (FSCM 78500 P/N 1199Q2981)
Moisture free compressed air
Crocus cloth
EQUIPMENT CONDITION
Paragraph
Condition Description
Vehicle parked on level surface, engine
off, wheels blocked, and parking brake
applied.
2-4b(1)
Shipping lock pin installed.
2-39c
Rear drive shaft assembly disconnected
from rear axle assembly differential
companion yoke.
2-43b, step 6
Brake line removed.
3-20b
Rear axle assembly mounting hardware
removed and rear chassis raised 12 inches
above rear axle assembly and blocked.
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1 Axle housing,
a. Container
Place under drain
Drain lubricant into 4 gallon container
bottom
plug
b. Drain plug
Remove and drain
lubricant
c. Container
Remove
Discard lubricant
3-147
|
