TM  10-3930-638-24&P 3-20.   AXLES   AND   DIFFERENTIAL   CARRIER   ASSEMBLIES   MAINTENANCE   (cont) c. Front Axle Differential Carrier Assembly (cont). STEP LOCATION ITEM ACTION REMARKS INSTALLATION  (cont) 7 Side  of Two  axle  shafts Install Para 2-39f, steps 12i and 12j vehicle 8 Axle  assembly Differential  carrier Fill with lubricant Para 2-39d, steps 2 and 4 assembly 9 Differential Front drive shaft Connect to differ- Para 2-39a, step 12 carrier assembly ential  companion assembly yoke 10 Transmission Rear drive shaft Disconnect Para 2-39c, step 1 rear output assembly flange 11 Front  axle Tires and wheels Raise off ground, place jack stands under axle housing Don’t allow anyone to stand in front of vehicle during following step; be sure front axle is securely blocked. Vehicle could slip off jack stands and hit anyone standing in front causing serious injury or  death. 12 Operator’s  com- a. Start engine and operate at idle speed partment b. Place transmission direction selector in F (forward) position and place speed selector in 3 (third) position c.  Disengage  parking  brake  and  operate  vehicle  for  five  minutes at full throttle to assure satisfactory lubrication of differ- ential carrier assembly parts d. Turn engine off and apply parking brake 13 Front  axle Tires and wheels Remove jack stands; lower to  ground 14 Transmission Rear drive shaft assembly Connect Para 2-39c, step 10 rear output flange 3-146

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business