TM  10-3930-638-24&P 3-12.   ALTERNATOR   REPAIR   (cont) STEP LOCATION ITEM ACTION REMARKS DISASSEMBLY 1 Alternator as- a. Drive end frame (1) Match  mark sembly  (31) and slip ring end frame (2) b. Four thru bolts (3) Loosen  and remove CAUTION Use extreme care not to touch stator winding Scribe  positioning  marks  on  frames  for correct  reassembly when inserting screw- driver blades and prying frames apart. Don't use hammer to drive frames  apart. c. Drive end frame (1) Separate Insert two screwdriver blades in slip ring and stator and slip end ring end frame (2) NOTE When  separating,  work  evenly  around  circumference  of  frame. d. Drive end frame(l) Remove Slip ring end a. Three nuts(5) Remove 2 frame (2) CAUTION Use care when removing to avoid damaging stator. b. Stator (4) Disconnect  and Tag stator leads for reassembly remove c. Two screws (6) Remove d. Capacitor (7) Remove e. Diode trio (8) Remove f. Two screws (9) Remove g. Nut (10) Remove h. Relay terminal (11) Remove i. Rectifier bridge as- Remove sembly  (12) j. Terminal stud insulator  (13) k. Two screws (14) l. Screw (15) m. Screw (16) n. Brush holder (17) o. Nut (18) Remove Remove Remove Remove Remove Remove p. Voltage regulator (19) Remove 3-95