TM  10-3930-638-24&P 2-47.   WHEELS   AND   TIRES   MAINTENANCE   (cont) STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Tire  and  wheel to be removed DISASSEMBLY 2 a. Six stud nuts ( I b. Tire and wheel a. Valve cap (2) b. Valve core (3) c. Tire (4) Remove Remove to work area Remove Remove Deflate  and remove d. Extension valve (5) Remove e. Air valve (6) Remove To deflate fire Refer  to  TM  9-2610-200-24  for remounting   procedures. CLEANING Dry cleaning solvent (P-D-680). used to clean parts is toxic and flammable. Wear projective goggles and gloves and use only in a well ventilated area. Avoid contact with skin. eyes. and clothes and don’t breathe vapors. Do not use near open flame or excessive heat and don’t smoke when using it. Failure to do so could cause serious Injury. If you become dizzly while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with skin or clothes iS made. flush with large amounts of water. If contact with eyes is made. wash eyes with water immediately. and obtain medical aid immediately. 3 INSPECTION 4 5 6 7 Wheel  (7) Stud nuts (1) Air valve (6). valve cap (2). extension valve (5), and valve core (3) Tire  (4) Wheel  (7) Clean Use cleasning solvent P-D-680: use wire brush to remove rust. corrosion or old rubber Inspect Replace if cracked. distorted. or threads damaged Inspect Replace if bent. distorted. cracked, or threads  damaged Inspect inside Replace if casing damaged or fabric and of  tire cord damaged. Remove foreign material Inspect Replace if cracked. bent. or damaged 2-326 Change 4