| |
TM 10-3930-638-24&P
2-39. AXLES AND DRIVE SHAFT ASSEMBLIES MAINTENANCE (cont)
e. Axle Breathers (cont).
(1) Front Axle Breather.
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Hydraulic control
valve, right side
Axle breather
Remove
Unscrew from hose fitting
CLEANING
WARNING
2
INSPECTION
3
4
INSTALLATION
5
Hydraulic con-
trol valve, right
side
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or exces-
sive heat and don’t smoke when using it. Failure to do so could
cause serious injury. If you become dizzy while using cleaning
solvent, get fresh air immediately, and get medical attention. If
contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water immed-
iately, and obtain medical aid immediately.
Axle breather
Clean
Immerse in cleaning solvent P-D-680
Axle breather
Inspect
Replace if dented or clogged
Axle breather hose
Inspect
Replace if cracked or deteriorated
Axle breather
Install
Screw into hose fitting
2-250
|
