| |
TM 10-3930-638-24&P
2-34. WIRING HARNESS MAINTENANCE (cont)
b. Rear Wiring Harness.
This task covers:
a. Cleaning
c.
Repair
b. Inspection
d. Testing
INITIAL SETUP
TOOLS
EQUIPMENT CONDITION
No. 1 Common Organiza-
NSN 4910-00754-0654
Paragraph
Condition Description
tional Maintenance Tool Kit
Engine off.
2-33b
Battery ground cable disconnected.
MATERIALS/PARTS
Cleaning solvent P-D-680
Clean cloths
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
1
Wiring harness and wire
Clean
Wipe with a clean, dry cloth
insulation
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or
excessive heat and don’t smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical
attention. If contact with skin or clothes is made, flush with large
amounts of water. If contact with eyes is made, wash eyes with
water immediately, and obtain medical aid immediately.
2
Electrical terminals and
Clean
Use cleaning solvent P-D-680 on
connectors
terminals and connectors only
INSPECTION
3
Wiring harness and wires
Inspect
Repair if insulation frayed, or if
conductor broken
CHANGE 2 2-191
|