TM   10-3930-638-24&P 2-30. LIGHT SYSTEMS MAINTENANCE (cont) d. Stop and Tail Light (cont). STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Light brackets at a. Two wire leads (1) Tag,  grasp  and From harness leads rear of vehicle pull b. Nut (2) and lock Remove washer (3) c. Lens (4) and socket Lift  and  remove From  light  bracket assembly  (5) d. Lens (4) Unscrew and Turn counterclockwise and lift from remove socket  assembly  (5) e. Lamp (6) Depress, turn From socket assembly (5) counterclock- wise and lift CLEANING WARNING Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use near open flame or excessive heat and don’t smoke when using it. Failure to do so could cause serious injury. If you become dizzy while using cleaning  solvent,  get  fresh  air  immediately,  and  get  medical attention. If contact with skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water  immediately,  and  obtain  medical  aid  immediately. 2 Socket  assembly  (5), wire terminals and connectors,  and  hardware 3 Lens (4) INSPECTION 4 All hardware 5 All  wiring 6 Lens (4) 7 Socket  assembly  (5) Clean Use cleaning solvent P-D-680 on metal parts  only Clean Wipe with a clean dry cloth Inspect Replace if worn, or threads damaged Inspect Replace if insulation frayed, or if conductors broken Inspect Replace  if  cracked  or  deteriorated Inspect Replace if wires, connectors or socket damaged 2-155