 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-638-24&P
4-4. TRANSMISSION MAINTENANCE (cont)
g. Low Clutch Assembly (cont).
REMARKS
ITEM
ACTION
LOCATION
STEP
REASSEMBLY (oont)
Lubricate oil seal with OE10 (refer to
Install and
Inner clutch piston
26
current lubrication order). To size
size
seal (19)
seal, rotate clutch piston while
holding a round object against new
seal as shown. Rotate clutch piston
until seal is flush with outer
diameter of clutch piston
NOTE
Seals must be sized before installing clutch piston in low clutch
shaft drum and bleed valve assembly (20).
CAUTION
Don't damage inner or outer seals.
Install
Clutch piston (17)
27
Position
Piston return spring (16)
28
Position
Spring retainer (15)
29
Install sleeve in press; place low clutch as-
Position
Retaining ring (14)
30
sembly on press and compress spring
retainer. Install retaining ring through
opening in sleeve as shown. Remove low
clutch assembly and sleeve from press
Change 1
4-212
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals