Control Levers and Linkages (cont). - TM-10-3930-638-24-P0435

TM 10-3930-638-24&P

2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)

b. cControl Levers and Linkages (cont).

ITEM

REMARKS

ACTION

STEP

LOCATION

REMOVAL

Unscrew from levers

Remove

Operator's com-

Four knobs (1)

partment,

instrument

panel, top

a. Four cotter pins (2)

Remove from

Operator's com-

control valve

partment,

spools

instrument

Remove

b. Four clevis pins (3)

panel, bottom

Place on work bench

Remove as an

c. Assembled control

levers

assembly from

bottom of

instrument

panel

Remove

a. Four cotter pins (4)

Assembled

b. Four clevis pins (5)

Remove

control levers

Remove

c. Eight valve links

(6 and 7)

Remove

d. Retaining ring (8)

e. Tilt control lever (9)

Remove

Used as required

f. Washer (10)

Remove

g. Lift control lever (11)

Used as required

h. Washer (12)

Remove

i. Shift control lever (13) Remove

Used as required

j. Washer (14)

Remove

k. Rotate control lever (15) Remove

1. Retaining ring (16)

Remove

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

Use cleaning solvent P-D-680

Clean

All parts

2-397