Parking Brake Assembly (cont). - TM-10-3930-638-24-P0316

TM 10-3930-638-24&P

2-42. PARKING BRAKE MAINTENANCE (cont)

b. Parking Brake Assembly (cont).

ITEM

STEP

LOCATION

ACTION

REMARKS

REPAIR

Brake shoe and

a. Ten rivets

Remove

Cut or drill from brake lining and shoe

lining (9)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible

blindness. If you hurt your eyes or if a foreign object is blown

into your eyes, seek medical attention immediately.

b. Brake shoe

Remove and clean Use cleaning solvent P-D-680 on shoe

contact face. Dry thoroughly with

compressed air

c. New brake lining

Position and clamp Clamp lining to shoe with C clamps so

rivet holes are in alignment

Install

d. Ten new rivets

Drive squarely into rivet holes with flat

head drift

2-280