Click here to make tpub.com your Home Page

Page Title: OPERATING PROCEDURES
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 10-3930-638-10
a. Starting the Engine (cont).
WARNING
Starting fluid is toxic and highly flammable,
Container is pressurized to act as an
expellent. Don't heat container and don't
discharge starting fluid in confined areas or
near open flame. Don't discard used
container in an open flame.
(10) If temperature is below 40 degrees F, use
quick start aid. Remove clip, then engage
starter while pressing quick start lever and
hold lever for one or two seconds.
WARNING
Be sure your seat belt is fastened before
starting engine.
(8) Depress accelerator pedal 1/3 to 1/2 from
normal position.
CAUTION
If there is no oil pressure indication on OIL
PRESS gage within ten to 15 seconds and
if oil pressure lamp is lit, turn engine
off and check cause.
(11) When engine starts, release START push-
button switch immediately. Reinstall clip in
quick start aid.
CAUTION
(12) Ten to 15 seconds after engine starts, check
OIL PRESS gage for proper indication. If
Don't operate starter motor for more than
proper indication is not obtained on gage,
30 seconds. Wait at least three minutes
turn engine off and check cause if oil pressure
before cranking to allow batteries to
lamp is lit.
recuperate and starter motor to cool.
(9) Depress START pushbutton switch.
2-14

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business