Table 2-1. Operator PMCS (cont) - TM-10-3930-638-100033

TM10-3930-638-10

Table 2-1. Operator PMCS (cont)

M - Monthly

W - Weekly

D - During

A - After

B - Before

ITEM TO BE INSPECTED

Interval

Equipment is Not Ready/

Item

Procedure: Check For And Have Repaired, Filled Or

Available If:

Adjusted As Needed

No.

DAWM

LIGHTS AND HORN

Check that head, tail, flood, blackout lights and horn are

working.

INDICATOR LIGHTS, OIL PRESSURE GAUGE, AND

HOURMETER

Check that alternator and oil pressure warning lamps are Alternator lamp or oil

pressure lamp are lit. Oil

not lit. Check oil pressure gauge for normal reading of

pressure gauge not within

50-70 psi, and hourmeter is working.

normal range.

LAMP TEST

With engine running, check that hydraulic filter by-pass, Engine or transmission

transmission temperature, and engine temperature indicator lamp does not function or

engine temperature or

lights function in test phase.

transmission temperature

NOTE

indicator lamp comes on

If HYDRAULIC FILTER light comes on during

during operation,

operation, finish shift and have filter replaced before

further operation.

LIFT FORK CONTROLS

Check that lift, tilt, side shift, and rotation movement is Any function fails to

operate or is erratic.

smooth and immediate.

STEERING

Check that truck steers freely and easily.

Steering sticks, binds, or is

thard to steer.

PARKING BRAKE

Check that brake holds vehicle. Turn knob clockwise

to tighten.

ACCELERATOR

Pedal sticks.

Check that accelerator operates smoothly.

TRANSMISSION CONTROLS

Transmission does not

Check that transmission shift levers operate smoothly

operate.

and correct gear and range are engaged.

BACK-UP ALARM

Check that alarm sounds in reverse.

BRAKES

Service brake won't

Check that normal brake pressure stops truck.

stop truck.

2-11