Quantcast Frame, Hood and Panels - TM-10-3930-634-340232

 

Click here to make tpub.com your Home Page

Page Title: Frame, Hood and Panels
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Section I. CARRIAGE AND BOOM ASSEMBLIES
Up
TM-10-3930-634-34 Truck Lift Fork; Diesel Engine Pneumatic Tired Wheels Rough Terrain 6 000 Lb. Capacity 24 Load Center Anthony Model MIT 6-2 Manual
Next
Figure 7-2. Boom assembly, Disassembly and reassembly
TM 10-3930-634-34
(4) Inspect all small parts and hardware for wear,
enclose the components of the forklift truck that are
cracks and other damage.
mounted in the frame under their protective cover.
(5) Inspect the hood and panels for dents, cracks
7-5. Frame, Hood and Panels
and other damage.
(6) Straighten minor dents in the hood or panels
a. Disassembly. Refer to figure 7-3 and disassemble
and weld cracks.
the frame, hood and panels.
(7) A frame that has only minor distortion maybe
b. Cleaning and Inspection.
straightened and then reinforced by welding a suitable
(1) Clean all parts thoroughly, using solvent
plate over the area. Weld cracks and broken welds. Re-
P-D-680 or equal.
move welding flux and inspect the area by a dye pene-
(2) Remove rust with a wire brush.
trant process.
(3) Inspect the frame for distorted or twisted
(8) Replace all defective parts.
areas or areas where the steel channel sections have
c. Reassembly. Refer to figure 7-3 and reassemble
collapsed or crimped, Inspect for broken welds or
the frame, hood and panels.
cracks or other damage.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.