6 - 6 . Hydraulic Lift Cylinder
(2) Refer to figure 6-9 and remove the lift cyl-
(1) Raise boom to gain access to cylinder and hard-
b. Disassembly. Refer to figure 6-10 anddisassem-
ble the hydraulic lift cylinder.
c. Cleaning and Inspection.
(1) Clean all metal parts thoroughly using solvent
Before commencing work on the hydraulic
P-D-680 or equal. Dry parts thoroughly.
lift cylinder, use supports provided to block
(2) Inspect parts for wear, scoring, scratches,
up boom. Serious injury or death may result
nicks and burrs.
from a falling boom.