 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 1O-393O-634-34
(2) Tag and disconnect hydraulic lines and hoses
as necessary. Remove wheels (TM 10-3930-634-12).
(3) Remove propeller shaft (para 5-3), steering
cylinder and linkage (para 5-15), and oscillating
cylinder (para 6-7).
(4) Refer to figure 2-4 and remove the axle as-
sembly.
WARNING
Never crawl under forklift truck while per-
forming maintenance unless it is blocked se-
curely. Failure to observe this warning may
result in serious injury or death. When re-
moving axles, be sure the truck is blocked to
prevent oscillation.
NOTE
Removal both axles in a similar manner.
b. Installation
(1) Refer to figure 2-4 and install the axle as-
sembly.
(2) Install propeller shaft (para 5-3), steering
cylinder and linkage (para 5-15), and oscillating
cylinder (para 6-7).
(3) Install wheels. Reconnect hydraulic lines and
hoses (TM 10-3930-634- 12).
2-8. Axle A s s e m b l i e s
(4) Remove blocking and lower forklift truck onto
a. Removal.
the axle assembly.
(1) Use a suitable lifting device and raise and
block the forklift truck under the main frame. Be care-
ful not to crush the brake tubing.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals