Section Il. DESCRIPTION AND DATA - TM-10-3930-634-340014

TM 10-3930-634-34

(5) Generator Regulator.

Output, forward operation. . . . . . . . . . Clockwise

Gear ranges, selector positions:

Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . Prestodite

Forward . . . . . . . . . . . . . . . . . . . . . . . . 4 speeds

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . VBC4004-UT

Reverse . . . . . . . . . . . . . . . . . . . . . . . . .4 speeds

Volts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24V, dc

Range control . . . . . . . . . . . . . . . . . . . . . . . . . . lst,2nd,3rd,4th

(6) Starter.

Direction control. . . . . . . . . . . . . . . . . Forward, neutral, reverse

Torque converter:

Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Type . . . . . . . . . . . Single-stage, polyphase, three-element, free-

Voids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

wheeling stator

Elements . . . . . . . . . . . . . . . . . . . . . . . . Impeller, turbine, stator

(7) Steering adjustments.

Toque multiplication radio . . . . . . . . . . . . . . . . . . . . . . . . 3.100 to l

Front steering linkage

Clutch data

Length between pivot centers. . . . . . . . . . . . . . . . . . . . . . 13 in.

. . . . . . . . . Multi-due, hydraulic-actuated, spring-released,

Rear steering linkage:

oil cooled

Length between pivot centers . . . . . . . . . . . . . . . . . . .21.484 in.

Material, . . . . Reaction plates-steel Friction plates-sin-

Length between grease fittings . . . . . . . . . . . . . . . . . . . .21 7/8 in.

tered bronze on steel

Steering mode cylinder . . Length is adjusted so holes in

Parking brake

intermediate link and pit-

Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13X3

man arm are aligned.

Type . . . . . . . . . . . . . . . . . . . . . . .. Expanding shoe, mechanical

Front drag link:

Rating . . . . . . . . 23,000 inch-pounds at 1500 pounds apply force

Length between pivot centers . . . . . . . . . . . . . . . . . .36.6524 in.

Flanges:

Rear drag link:

Input (remote mount) . . . . . . . Mechanics 2A-22314-1

Length between pivot centers . . . . . . . . . . . . . .44.31 in.

Rear . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanics 2A-22485-l

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanic 2A-22486-l

Oil system:

(8) Nut, bolt, stud and pipe plug torque data. The

Oil pump . . . . . . . . . . . . . . . Input driven, gear type, positive dis-

following specifications apply to clean, dry threads.

placement

Reduce the torque 10 percent when the threads are

Oil capacity, U.S. gal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

clean and oiled.

Oil cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heat exchanger

Converter-out oil:

(a) Exceptions to standard bolt and nut torque

Temperature . . . . . . . . . . . . . . . . . . . . . . . . . .250 F Maximum

specifications.

Main pressure . . . . . . . . . . . . . . . . . . . . . . . . . .240 to 280 psi

Size nut

Torque

or bolt

Application

(lb-ft)

1/4-20

10-12

Injector Control Shaft Bracket Bolts

1/4-20

Cam Follower Guide Bolts

12-15

5/16-18

Governor to Flywheel Housing

10-12

Idler Gear Hub and Spacer Bolts

5/16-18

19-23

3/8-16

Idler Gear Hub and Spacer Bolts

40-45

3/8-16

Flywheel housing Bolts

25-39

3/8-16

Injector Clamp Bolts

20-25

3/8-16

Air Box Cover Bolts

12-16

Connecting Rod Nuts Lubricated

3/8-24

40-45

Connecting Rod Nuts (Plain)

3/8-24

50-55

Flywheel Housing Bolts

3/8-24

25-30

Fuel Line Nuts

3/8-24

12-15

Fuel Connector

3/8-24

20-28

7/16-14

Rocker arm Bracket Bolts

50-55

Flywheel Bolts

1/2-20

110-120

l00-130

9/16-12

Main Bearing Cap Bolts

170-180

Cylinder Head Bolts

5/8-11

Flange Mounted Air Compressor Drive

3/4-10

Shaft Nut

200-220

3/4-16

Crankshaft End Bolt

Crankshaft End Bolt (In-Line engines

with cone mounted pulleys not

3/4-16

stamped with the letter "A")

3/4-16

Air Compressor Drive Pulley Nut

†--100 lb-ft plus increase torque to line up cotter pin..

Lubricate at assembly with International Compound or equivalent.

Change 2

1-2