Figure 2-2. Right Hand View of Engine
(e) Remove air cleaner and mounting bracket.
sion oil filter and drain lines into suitable container.
(f) Disconnect fuel lines from fuel pump.
(m) Disconnect hydraulic lines from hydraulic
(g) Disconnect accelerator linkage from
pump and drain lines into suitable container.
governor control lever.
(n) Remove counterweight, muffler, and
(h) Disconnect choke cable from carburetor.
(I) Remove battery cables.
(2) Block up securely underside of transmission.
(j) Drain engine oil, transmission oil, and
Support weight of engine with hoist attached to lifting
eyes on engine.
(k) Remove engine oil filter and mounting
(3) Remove hex locknuts (fig. 2-3) and lower
(l) Disconnect hydraulic lines from transmis-