Figure 7-15. Side shift carriage, exploded view.

TM 10-3930-631-34

1. Screw

13.

Lubrication fitting

2. Lock washer

14.

Screw

3. Nut

15.

Lower hanger

4. Screw

16.

Wear strip

5. Lock washer

17.

Wear angle

6. Screw

18.

Carriage frame

7. Spacer

19.

Cotter pin

8. Chain link

20.

9. Screw

21.

Cotter pin

10. Bearing

22.

11. Shim

23.

Plate

12. Shim

24.

Stud

Figure 7-15. Side shift carriage, exploded view.

(2) Attach a suitable hoist to plate (23) and lift

(5) Pry off wear angles (17) from carriage

plate to clear frame. Slide plate off right side of frame

frame.

(when facing frame) and remove from frame.

(6) Remove screws (19) and remove bearings

(3) Remove screws (1), lock washers (2) and

(10) from top studs. Use a suitable puller to remove

nuts (3) from plate. Remove screws (14) and remove

bearings from studs. Not size and quantity of shims (11

lower hanger bar (15).

and 12) used.

c. Cleaning, Inspection and Repair.

(4) Remove lubrication fittings (13). Pry off

wear strips (16).

(1) Clean all parts in cleaning compound,

solvent (Fed. Spec. P-D-680) and dry thoroughly.

7-24